Available Candidate
Profile ID: PRF00129 PADI Dive Instructor        2 References 
Attributes:
 Non Smoker  Degree Qualified  
  Far North Queensland,  Recreation Workers

- PADI Master Scuba Diver Trainer with 8 years of experience
  Passionate diver with strong sales skills

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Part Time, Casual, Temporary, Contract, On Call
Qualifications:

2016

PADI MSDT

Experienced

2011

PADI OWSI

Experienced

2011

HSA Instructor

Very Experienced

Certificates:
  • First Aid / AED / 02
  • NSS-CDS Full Cave
  • TDI Stage Cave
  • VHF Radio Cert
Candidate Introduction:

Hardworking PADI Instructor with eight years of experience training and guiding divers in the St. Lawrence River. Passionate about diving and accustomed to working in challenging conditions while facilitating great dive trips and ensuring exceptional customer service. 

Dive Industry Experience

Dive Brockville Adventure Centre – Brockville, Ontario, Canada         2014-2015 PADI Instructor  

n Teaching PADI Open Water and Advanced Open Water courses in challenging conditions while strictly adhering to PADI standards and ensuring customer success & satisfaction.

n  Responsible for all activities required for diver introduction and certification with little or no Dive Master support.

 

Freedom At Depth Canada – Gatineau, Quebec, Canada                       2008-2014 PADI & HSA Instructor                                                                                                              

n  Led hundreds of boat and shore based dives for divers with a wide range of sever disabilities including paraplegia and quadriplegia.

n  Primary buddy and Instructor, facilitating deep, drift, and night dives for students who cannot swim or perform basic dive skills independently.

 

Diving Qualifications

 

n  PADI MSDT

n  HSA Instructor 

n  NSS-CDS Full Cave Diver

n  TDI Sidemount, Full Cave & Stage Cave Diver

n  EFR Instructor

n  DAN First Aid for Dive Professionals

n  Current Australian CPR/AED/First Aid/Oxygen provider

n  VHF Radio Restricted Operators Certificaton

 

PADI Specialty Instructor Ratings

 

n  Night Diver

n  Deep Diver

n  Enriched Air NITROX

n  Dry Suit

n  Self Reliant Diver

n  Peak Performance Buoyancy

 

Dive Experience by Geography

 

n  Abaco, Bahamas – Cave diving

n  Florida, USA – Cave Diving

n  Yucatan, Mexico – Cave Diving

n  Algarve, Portugal – Ocean Diving

n  British Columbia, Canada – Ocean Diving

n  Phuket, Thailand – Ocean Diving

n  New Providence, Bahamas – Shark Diving

n  Great Lakes, Canada – Wreck Diving

Available Candidate
Profile ID: PRF00135 Apprentice Boilermaker        3 References 
Attributes:
 Own Transport  Non Smoker  Apprentice/Junior  
  Central Coast Queensland,  Boilermaker

- Out of work 2nd year Apprentice Boilermaker. Completed 2 yrs of apprenticeship.
  Hard working, eager, willing to learn, dilligent, reliable, easy going and safe.

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time
Qualifications:

2019

Cert III in Engineering - Fabrication Trade (Partially comp)

In Training

2012

Certificate II in Automotive Mechancial

Experienced

Certificates:
  • White Card
Candidate Introduction:

2013 / 2016  - Charters Towers City Regional Council - Apprentice Boilermaker

Certificate III in Engineering – Fabrication Trade (partial completion) through Barrier Reef Institute of Tafe

Fabrication of different metal materials as required

Hard facing using different methods of welding  - Mig/Stick/Tig/Aluminium

Maintenance on grid bridges and general plant and equipment

Understand and interpret drawings  

Liaise with Apprentice Trainer on job progress and status

Use power tools/hand held operations

Use workshop machines for basic operations

Undertake manual handling

Apply principles of OHS in the work environment

Moving forklifts and machinery around workshop

Assisted Diesel Fitters

Travel for work

Workshop cleaning

School Work Experience Program:

2010/2011           Peto Marine – Marine Mechanic

2012                    Sucrogen Inkerman Mill – Fitter and Turner and Boilermaker

Personal Work Experience:
2010-2013            Peto Marine – Duties included:-

                                General workshop duties;

                                Servicing outboard motors;

                                Overhauling trailers i.e. bearings, winches;

                                Dismantling and reassembling engines; and

                                Repairs to fibreglass boats.

Qualifications

·         Certificate II in Engineering – Fabrication Trade (partial completion)

·         Certificate II in Automotive Mechanical through the Barrier Reef Institute of Tafe

·         Queensland Driver’s Licence

·         Marine Licence


Skills & Abilities
Industrial Technology Studies Skills (During Senior Year Studies)

·         Grinding

·         Filing

·         Marking out

·         Drilling

·         Stick welding

·         Mig welding

·         Oxy welding/oxy cutting

·         Ability to read and understand graphical drawing

·         Work well with others

·         Work well independently

·         Follow jobs through to completion

 

Education
Subjects studied and results achieved (most recent)

English                                                           B

Mathematics A                                                C

Science in Practice                                          C

Recreation Studies                                          B

Industrial Technology Studies                               B

<!-- [if gte mso 9]>

Available Candidate
Profile ID: PRF00083 Labourer         
Attributes:
 Own Transport  Public Transport  Non Smoker  Own Tools  
  Far North Queensland,  Rigger

- Labour all rouder with experience.
  

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Casual, Temporary, Contract, On Call
Certificates:
  • White card
  • Basic scafolder
  • Basic Rigger
  • EWP
  • Dogger
Candidate Introduction:

5 years experience designing, building, transporting and warehousing scaffolding systems. Working in domestic, industrial and shipping environments.

Previous experience in telecommunication rigging. Installing steel work, antennas, cables ect for the 3G network.

Great work ethic and I work well, especially with small teams.

Fit and reliable.

Available Candidate
Profile ID: PRF00164 Instrumentation Technician        4 References 
Attributes:
 Own Transport  Qualified Tradesperson  Own Tools  
  Cairns,  Electrician

- Cert III Instro! Hard and dedicated worker. No job is too hard
  Safe as a bank when the going gets tough. Wont stop till job is complete

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Part Time, Casual, Contract, Fly in Fly Out
Qualifications:

2011

Electrotechnology Instrumentation

Very Experienced

Certificates:
  • Snr 1st Aid/LVR
  • W@H
  • Confined Space BA
  • BOSIET
  • HUET
  • White Card
Candidate Introduction:

I was recently employed as an Instrument and Control/Commissioning technician for EPS Australia on Barrow Island on the Gorgon LNG Project. In this role I was responsible for the Installation and commissioning, oversight of other instrument techs, loop checking, function testing, job pack creation, permit acquisition, tube rectification and installation. With demonstrated experience reading, understanding and following P&ID's, data sheets, calibration reports, loop drawings, cause and effects and supplier manuals also. I have the ability to use various types of calibrations equipment, also knowledge of Foundation Fieldbus and navigation of the HMI.

Pervious to this, I also have been responsible for the pre and post commissioning/pre start phases of several Gas Field Compression Stations as well as a major water treatment facility for Origin Energy at Reedy Creek. 

As a Supervisor/maintenance technician at the Olympic Dam copper mine for BHP Billiton as permanent backfill through Sudel Industries. There I was responsible for the supervision of several maintenance technicians, performing breakdown and preventative maintenance as required and calibration and fault finding of process instrumentation throughout the Smelter, Feed Prep, Acid Plant and Utilities, as well as any assets requiring workshop attention.

Prior to that I serviced Maersk drilling rigs off the North West Shelf of WA. Also, as an on road service technician had vast exposure to various other industries from pharmaceuticals and petro chemicals, gas compression, to water treatment and waste recovery. I have spent several years in heavy industry. Over the years, I have gained a range of skills and expertise in a vast area of industrial fields, skills that have steered me well in within my industry with a meticulous eye for detail and accuracy. I also pride myself on my safety record and my safe attitude towards myself, my co-workers and my work itself.

Available Candidate
Profile ID: PRF00235 Electical and instrument tech        2 References 
Attributes:
 Own Transport  Qualified Tradesperson  Diploma  
  South East Queensland,  Electrical Engineers and Technicians

- Superb technical skillset
  A team player

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Part Time, Casual, Temporary, Contract, Work at Home, Fly in Fly Out
Qualifications:

2011

Electrical trade

Experienced

2011

Instrumentation trade

Very Experienced

Certificates:
  • Beng (2017)
  • Electical L5
  • Instrumentation L5
  • Contractors cert
  • White card
Candidate Introduction:

Extensive experience in continuous and batch process manufacturing industries.

I have worked in the fields of electrical technician, instrument technician, automation engineer and senior plant engineer.

Currently studying Bachelor of Engineering Science with 1 year to go.  Indentured electrical and instrumentation trades. Advanced trades in electrical and instrumentation.

Strong passion for automation, instrumentation and process control. Excellent Allen Bradley PLC and drive experience, some Toshiba and citect scada experience. Currently developing embedded systems.

Reliability, maintenance strategy and incident investigation experience. Team leadership, budgeting, planning and scheduling, SAP.

Available Candidate
Profile ID: PRF00105 Retail Professional        2 References 
Attributes:
 Own Transport  Non Smoker  
  Far North Queensland,  Retail Salesperson

- Honest, reliable person who will work well within your required team environment
  Able to adapt well to new work environments.

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Part Time, Casual
Qualifications:

2011

Business administration Cert II

Experienced

2014

Business Administration Cert III

Experienced

Candidate Introduction:

• Completes store operational requirements by scheduling and assigning

employees; following up on work results

• Deal with customer enquiries in store and over the phone & general

customer service

• Secures merchandise by implementing security systems and measures.

• Protects employees and customers by providing a safe and clean store

environment

• Store presentation & merchandising

• Process incoming and outgoing stock

• Start and End Of Day procedures (Opening & Closing)

• Maintains store staff job results by coaching, counseling, and disciplining

employees; planning, monitoring, and appraising job results

Available Candidate
Profile ID: PRF00203 General Labourer, Machine Operator         
Attributes:
 Own Transport  Public Transport  Non Smoker  
  Brisbane South West Area,  Machinist

- Experienced in Construction Industry. Hard Worker. All Rounder Laborer.
  Experience in Jib Fixing, Truss Framing, Stone Masonry, Upholstery.

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Contract
Candidate Introduction:
  • Saw Operator
  • Machine Operator
  • General Factory Hand
  • Hand tools
  • Measuring
  • Cutting
  • Pre nailing
  • Polishing 
  • Reading plans
Available Candidate
Profile ID: PRF00150 Food and Beverage duty manager        2 References 
Attributes:
 Non Smoker  
  Townsville,  Bartender

- 11 years of hospitality industry knowledge.
  

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Part Time, Casual, Fly in Fly Out
Qualifications:

2012

Cert IV Hospitality

Advanced Level

2012

Cert IV Security Oporations

Very Experienced

2012

Senior first aid

Very Experienced

Certificates:
  • RSA
  • MLP1
Candidate Introduction:

* Food and beverage management 

* high levels of cash handling 

* Cocktails and designing of new cocktails

* All facets of Bar operations 

* High quality customer service standards 

* Security operations 

* The ability to handle customer grievances in a professional manner

* Developing staff rosters

* Ordering stock and stock rotation 

Available Candidate
Profile ID: PRF00201 Strategic Resume Writer & Designer        3 References 
Attributes:
 Diploma  
  South East Queensland,  Administrative Assistant

- Our Passion is Your Success
  Together we achieve....

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Contract
Candidate Introduction:

STRATEGIC RESUMES - Resume Writer and Designer (No Using Templates)

                                - Crafted to Industry Standards and Employer Expectations

                                - Professionally Designed to Stand Out Above the Rest

Available Candidate
Profile ID: PRF00226 Sales/Account Manager         
Attributes:
 Own Transport  Non Smoker  
  Brisbane,  Sales Manager

- A forward thing, results driven Retail Management Professional
  

Candidate Contact: Employers:  Log in to your account to view Extended Job Profile and Contact details.
Available for: Full Time, Contract, Fly in Fly Out
Certificates:
  • First Aid
Candidate Introduction:

 

A forward-thinking, results-driven and versatile Retail Management professional with extensive experience in directing retail Operations, Sales and Marketing, Business Development, Account and Personnel Management.  For the last 17 years, I have been in the employ of TradeTools Pty Ltd where I am currently an Area Manager based in Brisbane; this role has a strong focus on driving retail Sales, managing Warehouse Operations and Employee Management.  

 

Through the years of active interactions with people at all levels, I have developed a personal brand of superior client relations and stakeholder management; both internal and external.  With proven ability to implement effective policies and procedures, enhance productivity, and increase efficiency, I have a consistent record of growing revenues while reducing operating costs.  My expertise includes workforce management, managing sales and projections, and negotiations.

 

Having worked in various complex and challenging environments, I have attained a refined and professional level of interpersonal acumen including the ability to exercise effective influencing and negotiation skills to achieve customer-focussed outcomes that have contributed to my success. Key to this is my ability to problem-solve using a combination of critical and analytical thinking.  I proactively disseminate information to stakeholders and build rapport to achieve a high performing team.  My ability to influence, achieve buy-in and build relationships are my dominant strengths.